September 2020 21 PoolPak PCP Series – Indoor OMM
• Compressor (13), Receiver (14) and other components are located within the Compressor Compartment (3).
o If the dehumidifier has the standard pool water heating option, the compressor circuit additionally
includes the coaxial pool water heat exchanger (15) and refrigeration pool water heating valve.
o If the dehumidifier has the water-cooled air conditioning option (equipped with fluid cooler or
connected to external water-cooling source), the compressor circuit also includes the plate heat
exchanger (16).
• Main Electric Panel contains Main Control Board (17) and other electrical components.
o Vertical dehumidifier normally has Main Control Board mounted in the additional control sub-panel,
within Compressor Compartment and separately from Main Electric Panel.
o Operator Panel (TouchDisplay) could be installed inside the dehumidifier (normally – in the
compressor compartment) or provided separately for field installation. Feasible field installation
options include OP mounting plate (18) on the corner post or elsewhere in mechanical room or
maintenance office (see Interface and Communication for details).
To Next Page
Loading...
