PoolPak PCP Series - Dehumidifier Basic Information and Views; S Cab Dehumidifier Views and Options

PoolPak PCP Series – Indoor OMM 4 September 2020
Basic Information
Dehumidifier View and Options – S Cab
Standard PCP800 and PCP1200 dehumidifier’s general views and options * are shown on Pic.C.1.
Dehumidifier Options:
• Indoor, single-compressor dehumidifiers 2 and 3 tons’ capacity (apprx.) - models PCP800 and PCP1200 *.
o Two-compressor dehumidifier option (see Dehumidifier Optional Arrangement below for details):
4 and 6 ton cooling capacity (appx.) - models PCP808 and PCP1212.
• Airflow and ductwork connection options* (Return Air, Supply Air, Outdoor Air) - as shown on Pic. C.1.
• Optional Pool Water Heating **.
• Optional Space Heating - hot water coil, electric or gas heater ***.
• Air Conditioning (AC)* – external water cooling, outdoor condenser or fluid cooler.
Options:
• Return Air (RA) ductwork connection -
horizontal.
• Supply Air (SA) ductwork connection
options – top, bottom, horizontal*.
• Outdoor Air (OA) intake - horizontal*.
Piping Connections
①
Condensate Drain
②
AC – Air-Cooled (refrigeration)
③
AC – Water-Cooled (water/glycol)
④
Pool Heating Water
⑤
Space Heating Hot Water
Pic. C.1