15
7. Menu: Press sequentially to cycle through the following information:
• Pool Temperature (xx degrees Fahrenheit or Celsius)
• Cell Voltage (in many cases 21.0 to 27.0 volts when chlorine is being generated,
otherwise 16-31V)
• Cell Current (in many cases 2.50 to 7.80 amps when chlorine is being generated,
otherwise 0 amps during normal rest cycles.)
• Real-Time Salinity reading ( xxxx ppm or x.x grams/Liter.)
• System ID
• Software revision level
• Cell Version.
5. INSTALLATION CHECKLIST
To Next Page
Loading...