poolstar POOLEX CHLOE - Automatic Coverage Detector (Optional); Control Module

To Next Page

To Previous Page

5.5 Control Module

Control buttons:

1. Power: Use this button to manually power the system on or o󰀨.

2. Salinity: Displays the average measurement of the most recent salinity levels in the

pool water. The average is constantly being updated by real-time salinity readings.

TIP: When rst installed, this reading may display the last salinity readings taken at the

factory. This average will begin to update with your pool's operation over the rst 24

hours.

3. Super CL: Temporarily boosts Chlorine Output to Maximum Power (100%) for 24

hours, or until power is removed from the system.

4. Winter Mode: Reduces the chosen Chlorine Output setting by half, for periods of low

chlorine demand during cool weather.

5. Chlorine Output: Use the plus/minus buttons to raise/lower the system's power

setting (the rate of chlorine production), in order to customize operation for your pool's

needs.

6. Select: While in the Menu, the left/right arrows change options for Pool Temperature,

Instant Salinity, and Cell Version.

5. INSTALLATION CHECKLIST

2 3 4