5
3. WATER CHEMISTRY
As with any pool, it is important that you maintain proper water chemistry of the pool
water, including pH, alkaline content, and calcium levels. The only special requirement
for Salt Chlorinator CHLOE is to maintain proper levels of salt and stabilizer. It is
important to maintain these levels in order to prevent corrosion or scaling and to ensure
maximum enjoyment of the pool. Test your water periodically. It is recommended that
pool water be professionally tested a minimum of twice per season. Your local pool
store can provide you with the chemicals and procedures to adjust the water chemistry.
Be sure to tell the pool store that you are using a salt chlorine generator.
3.1 Ideal chemical level
Swimming Pools Spas
Free chlorine
1.0 to 3.0 ppm 3.0 to 5.0 ppm
Salinity
3000 to 4000 ppm 3000 to 4000 ppm
pH
7.2 to 7.8 7.2 to 7.8
Cyanuric Acid
(Stabilizer)
50 to 75 ppm 50 to 75 ppm
Total Alkanity
100 to 200 ppm 100 to 200 ppm
Calcium Hardness
200 to 400 ppm 150 to 450 ppm
Saturation Index
-0.2 to 0.2 -0.2 to 0.2
To Next Page
Loading...