Driving and Driving Safety 199
Warning message
Various messages are displayed on the multi-
purpose display on the instrument panel if there is
a system fault or if the compressor switches off
due to overload.
f For further information on warning messages
on the multi-purpose display:
Please observe the chapter “OVERVIEW OF
WARNING MESSAGES” on Page 147.
f Adapt your driving style to the changed condi-
tions.
f Consult a qualified specialist workshop in
order to remedy a system fault. We recom-
mend that you use a Porsche partner for this
work since these are staffed with trained
personnel and have the necessary parts and
tools.
f If the overload-protection function causes the
compressor to switch off, wait for a time until
it has cooled down. The system will function
again as soon as it has cooled sufficiently.
The warning message appears when the control
system is switched off and when the collapsible
spare wheel is being filled. There is no fault
present in these cases.
The warning message will disappear once these
procedures have been completed.
Raising vehicle with the jack
Whenever it is necessary to raise the vehicle using
the jack:
f Manually set normal level and then switch off
level control.
Switching off level control
1. Switch ignition on.
2. Press rocker switch forward for
5-10 seconds.
A message is shown on the multi-purpose
display of the instrument panel.
The vehicle can now be raised.
Switching level control back on
1. Switch ignition on.
2. Press rocker switch forward for
5-10 seconds.
or
3. Move off with the vehicle.
Level control switches on automatically.
Vehicle transport on car trains, ferries
and car transporters
f Lash the vehicle down only at its wheels.
To Next Page
Loading...
Need help?
General
