Minor Repairs 291
A -Tool kit
Jack
The jack is accommodated with the tool kit A
under the loadspace floor.
Warning!
Risk of injury. The vehicle may slip off the
jack.
f Only use the jack to raise the car for wheel
changing.
f Always place the vehicle on stable supports if
work has to be carried out under the vehicle.
The car jack is not suitable for this.
Lifting the vehicle with a lifting platform
or trolley jack
f For information on wheel changing: Please
observe the chapter “CHANGING A WHEEL” on
Page 301.
f Lift only at the jacking points provided.
f Before driving the vehicle onto a lifting
platform, ensure that there is sufficient space
between the lifting platform and the vehicle.
f In order to avoid serious damage, never jack
up the vehicle at the engine, transmission or at
the axles.
Tool kit
The tool kit and, where appropriate, the
compressor with pressure tester are accommo-
dated under the loadspace floor.
Note on operation
The screwdriver is located in the handle of the
wheel bolt wrench.
To Next Page
Loading...
Need help?
General
