200 Driving and Driving Safety
Porsche Active Suspension
Management (PASM)
Various messages are shown on the multi-purpose
display of the instrument panel.
f For further information on warning messages
on the multi-purpose display:
Please observe the chapter “OVERVIEW OF
WARNING MESSAGES” on Page 147.
Three different running-gear setups can be
selected at the push of a button:
–comfort
–normal
–sport
If the running-gear setups “comfort” or “normal”
have been selected, the system automatically
changes the setup to “sport” when the vehicle is
driven in a sporty manner.
Indication of the selected running-gear
setup
The light-emitting diode in the button of the
selected running-gear setup is lit.
In addition, the selected running-gear setup is
shown on the multi-purpose display of the instru-
ment panel for approx. 12 seconds.
Warning message
If there is a system error, a warning message is
shown on the multi-purpose display of the instru-
ment panel.
f Adapt your driving style to the changed
conditions.
f Consult a qualified specialist workshop in
order to remedy the fault. We recommend that
you use a Porsche partner for this work since
these are staffed with trained personnel and
have the necessary parts and tools.
Selecting the running-gear setup
1. Switch ignition on.
2. Press the appropriate button.
Note on operation
The running-gear setup selected last is stored in
the memory after the ignition is switched off.
To Next Page
Loading...
Need help?
General
