Air Conditioning, Parking Heater and Rear Window Heating 79
E - Parking ventilation symbol
F - ON time symbol
G - Memory location symbol
H - ON time
I -Parking heating symbol
Programming the parking heater
The parking heater has three independent
memory locations for programming the ON times.
The ON time together with the associated parking
heating or parking ventilation function can be
programmed in each memory location.
Complete programming of the parking heater
requires definition of the
– Function and
–ON time.
Programming function
1. Switch ignition off.
2. Press TIMER button on the front air-condi-
tioning control panel.
The symbols for the parking heating I or
parking ventilation E functions flash on the
display.
3. Select function.
Press button for parking heating or
button for parking ventilation.
If no other entry is made within 10 seconds, the
display returns to its initial status.
However, the selected function is retained and is
activated when the system is next turned on.
To Next Page
Loading...
Need help?
General
