To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 691 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120 V |
| No Load Speed | 27, 500 RPM |
| Max RPM | 27, 500 RPM |
| Weight | 8 lbs |
| Type | Router |
| Base Type | Fixed |
| Depth Adjustment | Yes |
| Amperage | 11 Amps |
| Speed | Single-speed |
| Collet Size | 1/4 in |
| Base Diameter | 6 in |
| Cord Length | 6 feet |
| Horsepower | 1-3/4 hp |
Defines safety symbols and terms like DANGER, WARNING, CAUTION for user safety.
Warns about hazardous chemicals in dust from certain activities and protective measures.
Guides on choosing and using appropriate router bits with the tool.
Step-by-step instructions for securely installing and removing router bits.
Instructions for properly securing the motor unit to the router base.
Explains how to set the precise cutting depth for the router bit.
Procedures for aligning the sub-base for template-guided routing.
Safe procedures for connecting the router to an electrical power source.
How to safely start and stop the router motor using its controls.
Best practices and techniques for efficient and safe router operation.
Information on using the edge guide accessory for straight cuts.
Instructions for using templet guides for pattern routing operations.
Instructions for cleaning the tool's parts and maintaining hygiene.
Troubleshooting steps if the tool fails to power on.
Information regarding the tool's lubrication requirements.
Guidance on inspecting and servicing motor brushes.
Details on how to identify and obtain necessary replacement parts.
Procedures for tool servicing and repair by authorized centers.
