EasyManua.ls Logo

Porter-Cable FCN200 User Manual

Porter-Cable FCN200
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FLOORING CLEAT
NAILER
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. 899223 (015)
ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 25
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2001 Porter-Cable Corporation
MODEL FCN200
Patent No: 6,155,472
899223 - 05-31-01.qxd 2/19/02 2:00 PM Page 1
Question and Answer IconNeed help?

Do you have a question about the Porter-Cable FCN200 and is the answer not in the manual?

Porter-Cable FCN200 Specifications

General IconGeneral
BrandPorter-Cable
ModelFCN200
CategoryNail Gun
LanguageEnglish

Summary

Safety Instructions

Personal Protective Equipment (PPE)

Mandatory use of safety glasses, ear protection, and hard hats.

Air Supply and Hose Requirements

Specifications for clean, dry, regulated air pressure and hose ratings.

Prohibited Air Sources and Couplings

Warning against gases and requirement for pressure-releasing air hose couplings.

Operational Safety Guidelines

Tool Handling and Maintenance Safety

Disconnect tool for maintenance, avoid leaks, ensure safety labels are present.

Trigger and Fastener Safety

Ensure trigger functionality, do not alter; load fasteners before air connection.

Advanced Usage and Safety

Trigger and Mallet Operation

Keep finger off trigger, use mallet on wood strip, use rubber mallet end.

Operating Instructions

Preparing the Tool

Using the Tool

Clearing a Jammed Fastener

Fastener Jam Clearing Procedure

Steps to disconnect air, remove fasteners, disassemble guide plate, and clear jam.

Maintenance

Troubleshooting

Common Tool Problems and Solutions

Addresses air leaks, tool non-operation, jams, and other problems with solutions.

Related product manuals