Porter-Cable FC350A User Manual

CLIPPED HEAD
FRAMING NAILER
MODEL FC350A
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No.
Type
Serial No.
Part No. 910412 - 05-23-03

Porter-Cable FC350A Specifications

General

Type	Framing Nailer
Operating Pressure	70 - 120 PSI
Power Source	Pneumatic
Width	4.5 inches
Nail Length	2 - 3.5 inches