To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable FM350A and is the answer not in the manual?
General| Brand | Porter-Cable |
|---|---|
| Model | FM350A |
| Category | Nail Gun |
| Language | English |
Explains DANGER, WARNING, and CAUTION symbols used for hazardous situations.
Emphasizes understanding warnings, proper operation, and using the tool as designed.
Stresses reading manuals, wearing safety glasses, and ear protection.
Covers trigger safety, avoiding hazards, and using correct compressed air.
Details air pressure, component ratings, and checks for leaks or damage.
Covers approved parts, loading sequence, and bystander protection.
Warns against overreaching, improper fastener driving, and tool recoil.
Highlights specific use cases like scaffolding, ladders, and material penetration limits.
Mandates employers to enforce safety warnings and keep manuals accessible for tool users.
Describes the nailer's purpose, nail compatibility, and collation angle.
Details the need for clean, dry, regulated compressed air and preferred supply system components.
Guides on connecting air supply, orienting and inserting fasteners correctly.
Explains how to pull and release the follower to feed nails into the nose casting.
Explains Single Sequential and Contact Actuation modes and how to select them.
Informs about obtaining a trigger for single sequential actuation only.
Details how to adjust the depth of fastener drive using the adjustment knob.
Describes the rubber nose cushion for marring reduction and toe-nailing applications.
Provides steps to release the follower and remove fasteners from the magazine.
Explains using a punch to free jammed driver blades and disassembling the magazine if needed.
Instructs on wiping the tool clean, checking mechanisms, and keeping screws tight.
States that repairs should only be done by authorized service centers for quality assurance.
Lists common symptoms like air leaks or jamming with corresponding solutions.
Advises using only Porter-Cable Delta accessories for safe and proper operation.
Outlines warranty coverage, exclusions, and obtainment procedures for repairs.
Provides contact information and addresses for service centers in various US states.
Lists contact information and addresses for service centers in Alberta, Manitoba, and Quebec.
