To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable NS150A and is the answer not in the manual?
General| Power Source | Pneumatic |
|---|---|
| Nail Size | 18 gauge |
| Operating Pressure | 70-120 PSI |
| Magazine Capacity | 100 nails |
| Nail Gauge | 18 gauge |
Defines DANGER, WARNING, and CAUTION safety alert symbols used in the manual.
Emphasizes reading all instructions and following basic safety precautions before use.
Emphasizes reading tool labels and the manual for safety and to avoid serious injury.
Operator and others must wear safety glasses, ear protection, and hard hats.
Keep fingers off trigger, never point at others, use correct power source.
Use clean, dry, regulated compressed air; never use gases; ensure correct pressure.
Air line components must be rated for pressure; use auto-disconnect couplings.
Do not use leaking or damaged tools; ensure safety/trigger mechanisms are functional.
Connect air before loading; do not load with trigger/safety depressed; no horseplay.
Details on Single Sequential and Contact Actuation modes for fastener firing.
How to adjust the depth of fastener drive using the adjustment knob.
Function of the rubber nose cushion for work surface protection and toe-nailing.
Wipe tool clean, inspect for wear/damage, ensure trigger/safety mechanisms are functional.
Only authorized Porter-Cable service centers should perform repairs.
Identifies common symptoms like air leaks, sluggish operation, and jamming with solutions.
