POSIFLEX PP-6906 series User Manual

20 pages

To Next Page

Page 1

FCC Notes:

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the user’s manual, may cause interference

to radio communications. It has been tested and found to comply with limits for a Class A digital

device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable

protection against interference when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference which case the user at his/her

expense will be required to take whatever measures to correct the interference.

CE manufacturer’s Declaration of Conformity

(EC Council Directive 89/336/EEC of 3 May 1989)

This product has been designed and manufactured in accordance with the International Standards

EN50081-1/01.92 and EN50082-1/01.92 following the provisions of the Electro Magnetic

Compatibility Directive of the European Communities as of May 1989

Warranty Limits:

Warranty terminates automatically when any person other than the authorized technicians opens

the machine. The user should consult his/her dealer for the problem having happened. Warranty

voids if the user does not follow the instructions in application of this merchandise. The

manufacturer is by no means responsible for any damage or hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex

will assume liability neither for any technical inaccuracies or editorial or other errors or omissions

contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including

without limitation loss of data or profits, resulting from the furnishing, performance, or use of this

material.

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims any

warranties, expressed, implied or statutory, including without limitation implied warranties of

merchantability or fitness for particular purpose, good title and against infringement.

The information in this manual contains only essential hardware concerns for general user and is

subject to change without notice. Posiflex reserves the right to alter product designs, layouts or

drivers without notification. The system integrator shall provide applicative notices and

arrangement for special options utilizing this product. The user may find the most up to date

information of the hardware from web sites: http://www.posiflex.com or

http://www.posiflex.com.tw or http://www.posiflexusa.com

A backup of all data should be kept prior to installation of a drive unit or storage peripheral.

Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this

or any other Posiflex product.

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a

retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,

or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of

this documentation.

All brand and product names and trademarks are the property of their respective holders.

PP-6906 Series

THERMAL PRINTER

USER’S MANUAL

Rev.: Original

P/N: 19780902010

Questions and Answers:

B
bryankimberlyJul 29, 2025
What to do if no LED lights up on the POSIFLEX PP-6906 control panel when powered on?
- A
  Amy RichardJul 30, 2025
  If no LED lights illuminate on the control panel when you power on the POSIFLEX Printer, ensure the power supply cables are correctly connected to both the printer and the power outlet. Verify that the power outlet is receiving power. If the outlet is controlled by a switch or timer, try using an alternative outlet.