To Next PageTo Next Page
Need help?Do you have a question about the POSIFLEX AURA PP-6900 and is the answer not in the manual?
General| Print Method | Thermal line printing |
|---|---|
| Paper Width | 80 mm |
| Weight | 1.7 kg |
| Paper Roll Diameter | 83 mm |
| Resolution | 203 dpi |
| Interface | USB, Serial, Ethernet |
| Cutter | Auto cutter |
| Power Supply | 24V DC |
Details the printer unit model and the included thermal paper roll.
Lists provided interface cables, power adapter, and user manual.
Identifies components like paper cover, hood release, and status LEDs visible from the top.
Highlights the power button and bottom cover visible from the front of the printer.
Shows the printer's base, detailing wall mount holes and screws.
Illustrates the back of the printer, identifying ports like USB and power connector.
Details the I/O area for the PP-6900L model, including LAN adaptor and reset button.
Shows the I/O area for PP-6900S/6901S models, featuring serial adaptor and serial port.
Illustrates the I/O area for the PP-6900P model, including parallel adaptor and port.
Displays the I/O area for PP-6900W/6901W models, featuring reset button and WiFi indicator.
Instructions to press the hood release button to open the paper cover.
Guide on raising the paper cover and placing the thermal paper roll inside.
Emphasizes proper closure of the cover to ensure correct paper feeding and cutting.
Instructions for installing the spacer plate for 58mm width paper rolls.
Indicators for replacing the paper roll, such as paper out signal or red line.
Detailed steps and notes on installing the spacer plate for 58mm width paper rolls.
Instructions for cleaning the print head and paper roll sensor using isopropyl alcohol.
Lists the items included in the wall mount kit for the printer.
Steps for selecting a suitable location and drilling holes for wall mounting.
Details on how to hang the printer onto the wall using screws and plastic cotters.
Instructions on how to manage the paper roll shaft when the printer is wall-mounted.
Describes two setup methods: hardware DIP Switch and software utility.
Explains the 8-position DIP switch on the printer's bottom cover for setup.
Details the functions of each DIP switch position (ON/OFF).
Method of setup using software utility for functions like jumper settings.
Instructions on how to download necessary drivers from the Posiflex website.
Lists detailed specifications for OS, printing method, speed, dimensions, and weight.
Details specifications related to printer life span, NV Bit Image, NV Graphics, and Receive Buffer.
Details specifications for paper type, width, diameter, thickness, and sensors.
Lists requirements for power adaptor input/output voltage, current, power, and regulation.
Advises on connecting only one interface at a time to avoid unexpected results.
