PP6000 Command Details - Page 2
EXPLANATION:
1. Print buffer is cleared after data printed. In text mode. When printer receives data
more than a line’s worth before a {LF}, the printer executes print buffer-full
printing.
2. Paper advances by one line based on the current line spacing after print.
3. In page mode the printing and paper feed does not actually occur on receiving this
command. But the data after {LF} will be arranged in next line.
4. This command sets the print position to the beginning of the line after line feed.
CODES
(HEX/CONTROL):
<0C> / {FF}
NAME:
Print and return to text mode in page mode
FUNCTION:
Prints the data in the print buffer collectively and
returns to text mode
EXPLANATION:
1. This command works only in page mode.
2. The buffer data is cleared after being printed.
3. The last printing settings in page mode printing such as underline, character font,
emphasized, double strike, character size and reverse printing remain the same for
text mode printing after this command.
4. The printing area set by {ESC} W in page mode remains the same after this
command.
5. The printer does not execute paper cutting by this command.
6. This command sets the print position to the beginning of line in text mode.
CODES
(HEX/CONTROL):
<0D> / {CR}
NAME:
Carriage return
FUNCTION:
Set the printing position to the beginning of the line
EXPLANATION:
1. When automatic line feed is enabled, this command functions the same as {LF};
To Next Page
Loading...
