Need help?Do you have a question about the Positive Grid BIAS MODULATION and is the answer not in the manual?
General| Brand | Positive Grid |
|---|---|
| Model | BIAS MODULATION |
| Category | Music Pedal |
| Language | English |
Initial steps for using the BIAS Modulation pedal and its features.
Obtaining, installing, navigating the interface, and managing presets in BIAS Pedal.
Customizing pedal appearance and configuring modulation, power, EQ, and amp modules.
Utilizing ToneCloud, noise gate, and general software settings for advanced control.
List of package items and instructions for powering the BIAS Modulation pedal.
Guidance on connecting the BIAS Modulation pedal in a guitar signal chain.
Steps to connect BIAS Modulation with both desktop and mobile BIAS Pedal applications.
Explanation of the knobs, buttons, and footswitches on the BIAS Modulation hardware.
Overview of input/output jacks, USB, MIDI, and power connections on the rear panel.
Understanding mono/stereo operation and the different bypass modes available.
How to engage presets and save modified settings directly on the pedal.
How to map presets to the footswitches for custom control.
Explanation of Module 1 (Time-based) and Module 2 (Amplitude) parameters.
Explanation of the different LFO waveform shapes available for modulation.
How to set and adjust the tempo using the Tap Tempo footswitch.
How to connect and calibrate an expression pedal for variable parameter control.
Information on MIDI ports, channel configuration, and external device connection.
Mapping MIDI messages for preset switching, parameter control, and clock synchronization.
How to perform a factory reset to restore the pedal to its default state.
Detailed breakdown of the UI elements in both desktop and mobile BIAS Pedal applications.
Instructions for redeeming software and details on system requirements for desktop use.
How to navigate and manage presets using the BIAS Pedal software's preset menu.
Options for saving, overwriting, and sharing presets within BIAS Pedal.
Customizing the visual appearance of the pedal with photo, name, box, color, and knob.
Detailed explanation of Module 1's topology, sync display, intensity, tone, and low cut.
Explanation of specific parameters like Rate, Depth, Voice, Feedback, Wobble, Width, Offset for Module 1.
Explanation of parameters like Rate, Depth, Wobble, Shift, LFO, and Output for Module 2.
Controls for the output stage, including Attack, Release, COMP, Output, and Battery settings.
Explanation of Studio EQ, Parametric EQ, and Graphic EQ modules for tone adjustment.
Detailed parameters for Studio, Parametric, and Graphic EQ modules.
Adjusting threshold and decay values for the noise gate in each preset.
Evaluating pedal sounds with amp models and simulating effects loops.
How to preview and download presets from the ToneCloud platform.
Configuration options for both desktop and mobile BIAS Pedal applications.
Using BIAS Pedal as a remote interface and managing presets in Remote Mode.
Managing device settings like disconnect, bypass type, MIDI, backup, and reset.
Instructions for updating the BIAS Modulation pedal's firmware using BIAS Pedal.
Details of the one-year limited warranty for Positive Grid products.
Procedures and conditions for repairs or replacements during the warranty period.
Agreement terms for using the BIAS Pedal software and Positive Grid Products.
To Next Page