To Next Page
V
Victoria AndrewsAug 11, 2025
What to do if my POSline SM2430 Barcode Reader is on but cannot read barcodes and the LED stays blue?
- JJennifer LittleAug 11, 2025
There might be several reasons why your POSline Barcode Reader isn't reading barcodes. First, the scanner window could be dirty, so you should clean it according to the Maintenance section. Another reason could be that the barcode type isn't enabled; use the Programming Guide to enable it. Also, the host might have disabled the scanner, so you should check the host setup. Finally, the barcode type might not be supported by the scanner.
General
