Postek I Series

To Next Page

To Previous Page

I Series User’s Manual

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

This equipment may generate, use and/or radiate radio frequency energy. If not installed and used in full accordance with

this instruction manual, interference to radio communications may occur. This equipment complies with the limits for a

Class A Information Technology Equipment pursuant to Part 15 of the FCC Rules, which are designed to provide

reasonable protection against such interference when operated in a commercial environment. Operation of this

equipment in a residential area may also cause interference. In such case the user will be required, at own expense, to

correct the interference using whatever means necessary.

Trademarks

ARM is a registered trademark of Advanced RISC Machines Ltd.

Microsoft, Windows are registered trademarks of Microsoft Corporation.

POSTEK is a registered trademark of Postek Electronics Co., Ltd.

reproduced in any form without the prior written permission of Postek. No patent liability is assumed, with respect to the use

of the information contained herein.

I Series Label Printer User’s Manual

4th edition August 2012

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the

Postek I Series label printer at the time of this manual’s distribution. However, succeeding printers and manuals are subject

to change without notice. Postek assumes no liability for damages incurred directly or indirectly from errors, omissions or

discrepancies between the printer and this manual.

Although this manual describes and details many issues which could possibly occur, the manufacturer cannot warrant

against unpredictable conditions during the printing process. For problems such as the printer not working, lost or unclear

print content, etc., the manufacturer and resellers are responsible for correcting these issues (according to Postek Printer

Warranty Clauses). In no event shall the manufacturer or the resellers involved be liable for any damages whatsoever

(including, without limitation, damages for loss of business profits, business interruption, loss of business information, or

other pecuniary loss) arising from the use of, the results of use or inability to use this product, even if the manufacturer has

been advised of the possibility of such damages.

Postek I Series - Page 2