1.4 Memory Mode
The scanner can be configured to store all scanned barcodes in the
scanners internal memory. While in memory mode the scanner will
not transmit any barcodes until the "Transmit Stored Data" barcode
is scanned. The scanner can hold a maximum of X barcodes in
internal memory.
Scanning "Transmit Count of Stored Barcodes" will transmit the
number of barcodes currently held in memory mode. "Clear All
Stored Data" will erase all stored barcodes from the scanners
memory and can not be un-done.
Enter Memory Mode
Transmit Stored Data
Exit Memory Mode
Transmit Count of Stored Barcodes
Clear All Stored Data
To Next Page
Loading...
