10
1. Make sure the transmitter and the battery of the drone are fully
charged.
2. Before starting, please conrm that the left stick of the transmitter is
in the middle position.
3. Please follow the correct steps to turn on the drone/transmitter.
Before ight, turn on transmitter and then the the drone. After ight,
turn o the drone and then transmitter. Turning ON/OFF incorrectly
may cause the drone to lose control.
4. Make sure to correctly install the battery, motor, etc.
5. Improper operation may cause drone crash, which may cause a
motor defect, prevent you from ying, and other issues. Please go to
the local distributor to buy new parts for replacement so that the
drone will return to its best
http://www.ipotensic.com
To Next Page
Loading...
