EasyManua.ls Logo

Potensic D88 - LCD screen display

Potensic D88
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Aircraft status indicator
Battery is low “ ” ; the aircraft will return when
the altitude is over 15m or the distance is over
15m; if either the flying altitude or flying distance
is less than 15m, the aircraft will land to the ground.
Battery is running out “ ”; the aircraft will return
when the altitude is over 50m or the distance is
over 100m.
Battery icon shows “ ” on LCD
display, with steady and long "di" sound.
Battery icon shows “ ” on LCD display,
with steady "di di di.. di di di..." sound.
No.
1
2
3
4
5
Remote controller status
Signal strength indicator changes circularly
from weak to strong.
Signal strength on LCD display is less
than two grids or no displaying, with
steady long beep sound.
The remote controller is under signal connection
status.
The remote controller is in low voltage.
Please change a full charged battery.
1. The distance between aircraft and remote
controller is so long that the signal is weak.
2. The battery is removed after the aircraft
connects to the remote controller.
Description
Indicator lights flash slowly with steady
"di di... di di..."sound and the
battery “icon” “ ” on LCD display flashes.
LCD screen display
Remote controller
battery electricity
GPS mode
Satellite
“number"
Altitude against
Home Point
Photo/Video
Return to Home
(RTH) icon
Aircraft battery
electricity
Remote controller
throttle mode
Distance against
Home Point
Signal strength
High/Low speed
mode
Potenstic D88 User Manual
-15-

Related product manuals