Potensic P7 - Disclaimer and Notice; Flight Precautions; Flight Environment Requirement

- 13 -
Disclaimer and Notice
The product is not a toy, but a precise equipment integrating mechanical, electronic, aerodynamics,
high-frequency emission and other professional knowledge. It needs correct assembly and
debugging to avoid accidents. The user must use a safe way to operate the drone. Improper
operation may cause serious personal injury or property damage.
This product is suitable for people who have the experience of operating RC aircraft and age over 14
years old.
Flight Precautions
1. Check whether the remote control, flight battery and mobile equipment are fully charged before
flight.
2. This product is suitable for the remote control aircraft flying in indoor and outdoor environment
(below force-3 wind(Gentle breeze)). Please select the indoor and outdoor sites without obstacles
and keep a proper distance from the crowd or pets.
3. When flying indoors for novice, please install propeller guards.
4. Check whether the fuselage is complete and whether the propeller is deformed.
5. Check whether the App works normally.
6. Out of control protection: the motor will stop automatically after 0.5 seconds when the aircraft
horizontal tilt angle is greater than 80 degrees.
Flight Environment Requirement
1. Fly away from people and avoid bad weather
The remote controlled drone may be uncertain in flight speed during fly, which poses potential
danger. It shall be far away from people, high-rise buildings, high-voltage wires, etc. And avoid
flying in the bad weather such as wind and rain, thunder and lightning.
2. Keep away from humid environment
The interior of the drone is composed of many precise electronic components and mechanical
parts. Therefore, it is necessary to protect the drone from humidity or prevent water entering the
drone body, to avoid accidents caused by the failure of mechanical and electronic components.
3. Keep away from heat source
The remote controlled drone is composed of metal, fiber, plastic, electronic components and other
materials. Therefore, it is necessary to keep away from the heat source as far as possible,
prevent sunlight, avoid deformation or even damage due to high temperature.
4. Avoid flying alone
It is difficult to learn control skills of a new drone as the beginner. It is necessary to avoid flying
alone as much as possible, and needs instruction of experienced operators.
5. Safe operation
Please operate the remote controlled drone with best mental status and operational proficiency.
Fatigue, poor mental state or improper operation will increase the probability of accident risks.
6. Keep away from high-speed rotating parts
When the drone rotor is rotating at high speed, keep the operators, surrounding people and
objects away from rotating parts to avoid danger and damage.