To Next PageTo Next Page
Need help?Do you have a question about the Potterton Statesman 45/50 and is the answer not in the manual?
Emphasizes the importance of following installation and service instructions for safety.
Details the risks associated with fuel vapors and contact.
Lists essential safety measures for handling and storing fuels.
Provides immediate actions and first aid for fuel spills.
Details hazards associated with materials used and necessary precautions.
Details the calibration and function of boiler thermostats and the burner.
Wiring diagram for the Statesman System and Statesman models.
Specifies required clearances for installation around the boiler.
Lists relevant building regulations and standards for installation.
Discusses the installation and requirements of sealed primary systems.
A critical safety warning regarding the discharge point of the overflow.
Details electrical connection requirements, earthing, and fusing.
Detailed steps for burner preparation and operation.
Steps for preparing the boiler and system before commissioning.
Steps for commissioning the DHW system for Flowsure/Flowsure+.
Detailed steps for annual boiler servicing.
Advice on routine maintenance, including seasonal checks.
Troubleshooting steps for a non-starting or malfunctioning burner.
Troubleshooting steps for no flame establishment or instability.
Troubleshooting steps when oil is present but no flame.
Troubleshooting steps for lock-out after flame establishment.
Troubleshooting steps for unstable flame conditions.
Troubleshooting steps for smoke, smell, or pulsation issues.
Diagnosing frequent limit stat trips and boiler stat issues.
General