Pottinger SERVO 25 - Before Driving to the Field

(981) 0000-GB VOREINSTELLUNG
GB
PRESETTING THE PLOUGH
- 9 -
Before driving to the field
SERVO
SERVO NOVA
see next page
SERVO PLUS
SERVO NOVA PLUS
1. Carry out basic setting according to table B, with average
cutting width position.
2. Carry out a more accurate setting when in use.
Setting both the spindles (ZP, VF)
Drawing point (ZP)
Backfurrow (VF)
• Setting depends upon the inside distance between the tractor
wheels (RA) and the set furrow width .
- Further Information on the drawing point and backfurrow
in chapter "OPERATION"
.
RA
TD65/92/35
Table-B
for
SERVO NOVA PLUS
Table-B
for
SERVO PLUS
TD126/98/07
VF
ZP