Poulan Pro 3450 User Manual

PoUlan
®
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner I'outil au ddtaillant.
• 1-800-554-6723
www.poulan.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
3450/3750
&
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea et manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous les avertisse-
ments et toutes les instructions de s_curit& Tout d_faut de le faire
pourrait entra_ner des blessures graves.
Electrolux Home Products, Inc. Electrolux Canada Corporation
250 Bobby Jones Expressway 6150 McLaughlin Road
Augusta, GA 30907 Mississauga, Ontario L5R4C2
[] From the EtectroluxGroup. The world's No.l choice,
I_ITCIJF_,CLE,_N/NGAN#OUTDOOR,_ppIJAN_ESCOM_NEIJ
Copyright/o2002 Electrolux Home Products, Inc. 530086533 12/2/02

Poulan Pro 3450 Specifications

General

Engine Displacement	50 cc
Bar Length	20 in
Weight	17 lbs
Chain Pitch	0.325 in
Chain Gauge	0.050 in
Engine Type	2-stroke

Summary

Identification of Symbols and Safety Rules

General Safety Symbols and Warnings

Explains safety symbols like dangerous chain saw, read manual, wear protection, and use two hands.

Kickback Warning and Measurement

Details kickback causes, tip contact, and measured value without chain brake.

Pre-Operation and Planning Safety

Covers disconnecting spark plug, general tool warnings, planning ahead, and proper attire.

Operating and Maintaining Your Saw

Safe Saw Operation Techniques

Guidance on safe operation including two-handed use, outdoor operation, and avoiding chain contact.

Saw Maintenance and Fuel Handling

Understanding Kickback Hazards

Explains kickback types (Rotational, Pinch, Pull-In) and methods to avoid them.

Kickback Control and Safety Features

Reducing Kickback Chance

Strategies to prevent kickback including clearing the area, chain maintenance, and cutting techniques.

Maintaining Operator Control

Integrated Kickback Safety Features

Assembly and Chain Tensioning

Checking and Adjusting Chain Tension

Guidance on how to check and adjust chain tension for optimal performance and safety.

Operation and Basic Controls

Know Your Saw Controls

Fueling, Lubrication, and Starting

Engine Fueling and Mixture

Requirements for unleaded gasoline, correct oil mixture ratio, and fuel handling safety.

Bar and Chain Lubrication

Cold Engine Starting Procedure

Step-by-step guide for starting a cold engine using the choke and fast idle lever.

Starting Procedures and Chain Brake

Warm Engine and Difficult Starting

Chain Brake Operation and Testing

Details on chain brake function, activation, disengagement, and how to test it.

Cutting Techniques and Safety

Tree Felling Techniques Overview

Felling Large Trees (Notch Method)

Storage and Troubleshooting

Troubleshooting Common Issues

Table detailing common engine problems and their remedies.