Poulan Pro 530164603 User Manual (English)

Questions and Answers:

K
Kevin BatesAug 11, 2025
Why won't my Poulan Pro Chainsaw start?
- S
  Sharon AndersonAug 11, 2025
  If your Poulan Pro Chainsaw won't start, several factors could be the cause: * The ignition switch might be off; move it to the ON position. * The engine could be flooded; refer to the “Difficult Starting” section in the Operation Section. * The fuel tank may be empty; refill it with the correct fuel mixture. * The spark plug might not be firing; install a new spark plug. * Fuel may not be reaching the carburetor; check for a dirty fuel filter and replace if necessary, or check for kinked or split fuel lines and repair or replace them.
M
Monique FreemanAug 18, 2025
Why Poulan Pro 530164603 engine will not idle properly?
- N
  nicole81Aug 18, 2025
  If your Poulan Pro Chainsaw engine won't idle properly, it could be due to the following reasons: * The idle speed may need adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The carburetor may require adjustment; contact an authorized service dealer for assistance.
E
Ellen SavageAug 23, 2025
What to do if Poulan Pro 530164603 Chainsaw chain moves at idle speed?
- A
  Amber IrwinAug 23, 2025
  If the chain on your Poulan Pro Chainsaw moves at idle speed, it could be due to: * Idle speed requiring adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The clutch requiring repair; contact an authorized service dealer.
S
Scott FranklinAug 29, 2025
What to do if Poulan Pro Chainsaw won't accelerate?
- J
  Jason HarrisAug 29, 2025
  If your Poulan Pro Chainsaw won't accelerate, lacks power, or dies under a load, consider these potential causes: * The air filter may be dirty; clean or replace it. * The spark plug might be fouled; clean, replace, and regap the plug. * The chain brake could be engaged; disengage it. * The carburetor may require adjustment; in this case, it is recommended to contact an authorized service dealer.
T
Taylor PhillipsSep 4, 2025
How to fix excessive smoke from Poulan Pro 530164603?
- V
  Victoria HuntSep 4, 2025
  Excessive smoke from your Poulan Pro Chainsaw usually indicates too much oil mixed with the gasoline. To resolve this, empty the fuel tank and refill it with the correct fuel mixture.