This document is a user manual for a Poulan Blower, model PLB 26. It provides comprehensive information on the device's function, technical specifications, usage, and maintenance.
Function Description
The Poulan PLB 26 is a handheld blower designed for outdoor use, primarily for clearing debris such as leaves, grass clippings, and light snow from various surfaces like driveways, patios, sidewalks, and lawns. It operates by generating a powerful stream of air to move unwanted materials. The blower is equipped with a muffler to reduce noise during operation and features controls for starting, stopping, and adjusting the engine speed.
Important Technical Specifications
The manual includes a "TECHNICAL DATA" section on page 7, which lists key specifications:
- Peak Velocity in MPH (m/s): 190 (85)
- Volume in CFM (m³/min): 430 (12)
- Force in N: 8.54
The device is powered by a 2-cycle engine that requires a specific fuel mixture of gasoline and 2-cycle engine oil, typically at a 50:1 ratio. It is designed to meet EPA Phase 3 regulations for exhaust and evaporative emissions. The manual emphasizes the importance of using unleaded gasoline with an octane rating of 87 or higher and recommends Poulan/Weed Eater brand 2-cycle engine oil for optimal performance and warranty compliance. The fuel tank capacity is not explicitly stated in the technical data but is implied through fuel mixing instructions. The device's weight and dimensions are not provided in the technical specifications but are typical for a handheld blower, designed for ease of use and maneuverability.
Usage Features
The Poulan PLB 26 is designed for user-friendly operation with several key features:
- Starting System: The blower utilizes a pull-start mechanism. Detailed instructions are provided for both cold and warm starts, including priming the carburetor, setting the choke, and pulling the starter rope.
- Operating Controls: It features a throttle trigger for controlling engine speed, a choke lever for starting, and a stop switch for immediate shutdown. An idle speed adjustment screw allows for fine-tuning the engine's idle.
- Fuel Mixture: The device requires a precise mixture of gasoline and 2-cycle engine oil. The manual provides clear instructions for mixing fuel, emphasizing the 50:1 ratio and the use of fresh, clean unleaded gasoline. It warns against using alternative fuels like E-15 or E-85, which can damage the engine.
- Blowing Technique: Users are advised to operate the blower at full throttle for maximum efficiency, sweeping debris away from people, animals, and objects. The manual suggests using the blower in the morning or late afternoon to minimize noise disturbance.
- Safety Features: The manual highlights numerous safety precautions, including wearing eye protection, hearing protection, heavy-duty long pants, long sleeves, boots, and gloves. It warns against operating the blower in wet conditions, near children or bystanders, and in areas with poor ventilation. The device is equipped with a muffler to reduce noise, but hearing protection is still recommended.
- Storage: Instructions are provided for preparing the blower for storage, especially for extended periods, including draining the fuel tank and carburetor to prevent fuel degradation.
Maintenance Features
Regular maintenance is crucial for the longevity and optimal performance of the Poulan PLB 26. The manual outlines several key maintenance tasks:
- Spark Plug: Regular inspection and replacement of the spark plug are recommended. The manual specifies the correct spark plug type (Champion RCJ-6Y) and gap setting (0.6-0.7 mm).
- Air Filter: The air filter should be cleaned frequently, especially in dusty conditions, to ensure proper engine performance.
- Fuel Filter: The fuel filter, located inside the fuel tank, should be checked and replaced periodically to prevent fuel system contamination.
- Muffler and Spark Arrestor Screen: The muffler and spark arrestor screen should be inspected and cleaned regularly to prevent carbon buildup, which can affect engine performance and increase fire risk. The manual notes that the spark arrestor screen is subject to California emissions regulations.
- Carburetor Adjustments: Instructions are provided for adjusting the carburetor's idle speed. However, for more complex carburetor adjustments, the manual recommends contacting an authorized service dealer.
- General Cleaning: The device should be kept clean, especially the cooling fins, to prevent overheating.
- Lubrication: While not explicitly detailed as a separate section, the use of 2-cycle engine oil in the fuel mixture provides internal lubrication for the engine.
- Troubleshooting: A comprehensive troubleshooting table is included, listing common problems, their causes, and recommended remedies. This section helps users diagnose and fix minor issues before needing professional service.
- Warranty Information: The manual includes detailed warranty information, outlining the terms and conditions, responsibilities of the owner, and procedures for obtaining service. It emphasizes using genuine replacement parts and authorized service dealers for repairs to maintain warranty validity.
The manual also includes important environmental protection agency (EPA) and California Air Resources Board (CARB) emission control warranty statements, highlighting the manufacturer's commitment to environmental compliance and the owner's responsibilities regarding emission-related parts.
Need help?
General
To Next Page