The Poulan Pro PRBP675i (BBP58VPR) is a cordless backpack blower designed for outdoor use, powered by a 58V brushless motor. It offers both standard and boost power modes, digital cruise control, and a battery status indicator.
Function Description:
The PRBP675i is a battery-operated backpack blower used for clearing leaves and other unwanted materials from the ground. It features a flexible tube, upper and middle tubes, and a nozzle to direct the airflow. The digital control handle allows for precise control over the blower speed, and the digital cruise control feature enables sustained operation at a set speed without continuously holding the trigger. The backpack design, complete with a harness, ensures comfortable and balanced operation. The product can be configured for both right-handed and left-handed users by rotating the fan housing assembly.
Important Technical Specifications:
- Model: PRBP675i (BBP58VPR)
- Motor Type: Brushless
- Motor Voltage: 58 V (DC)
- Continuous Motor Power: 1200 W
- Peak Motor Power: 1500 W
- Default Battery Pack Type: PR280Li
- Default Battery Charger Type: PR275Ci
- Max. Air Velocity: 67 m/s (150 mph)
- Max. Air Volume: 19 m³/min (675 cfm)
- Weight (without battery pack, with tubes): 6.15 kg (13.6 lb)
Usage Features:
- Power Modes:
- Standard Mode: Saves energy and maximizes run time, suitable for most tasks. This is the default mode upon startup.
- Boost Mode: Operates at maximum power for demanding tasks. Activated by a dedicated boost mode button.
- Digital Cruise Control: Allows the user to set and maintain a blower speed without holding the trigger. The speed can be temporarily increased by pulling the trigger, returning to the set cruise control speed upon release.
- Power Meter: Displays the amount of power the product is using during operation. LED lights indicate performance and battery efficiency (LEDs 4 and 5 for best performance/efficiency, LED 6 for maximum power/minimum efficiency).
- Battery State of Charge LED: Shows the current charge level of the battery pack. This status is displayed until the trigger is pulled and again when the trigger is released. Multiple LEDs indicate a full charge (100%-76%), while a single flashing LED indicates a very low charge (5%-0%).
- Adjustable Digital Control Handle: The control handle can be adjusted to the user's preferred operating position for comfort and control.
- Left-Handed Operation: The fan housing assembly can be rotated 180 degrees to position the blower tubes on the opposite side of the backpack, accommodating left-handed users.
- Harness System: Includes hip and chest straps for secure and balanced carrying, distributing the product's weight to the user's hips.
Maintenance Features:
- Daily Maintenance:
- Remove the battery pack before any maintenance.
- Examine nuts, screws, and bolts for tightness.
- Check the trigger and power button for correct operation.
- Remove external unwanted material from the product using a soft brush or dry cloth. Avoid using water, cleaning fluids, or solvents.
- Use a soft brush to remove unwanted material from the air vents.
- Inspect the product for missing, damaged, loose, or worn parts.
- Ensure moving parts align and operate safely.
- If damaged, contact an approved service center; do not use a damaged product.
- Battery Maintenance: Refer to the battery pack's operating instructions for specific maintenance.
- Troubleshooting: The manual provides a detailed troubleshooting guide for common issues like the product not starting, including possible causes (e.g., power off, no electrical contact, uncharged/overcharged battery, hot/cold battery or motor controller) and corresponding solutions.
- Error Codes: Specific LED patterns on the battery status indicator provide error codes for diagnosing issues with the battery pack or charger, such as internal fuse blown, irregular cell voltage, battery pack overcharged, battery pack failure, or incorrect internal battery temperature. Solutions typically involve contacting an approved service center or allowing the battery/charger to reach an optimal temperature.
The manual emphasizes reading all safety warnings and instructions to prevent electric shock, fire, or serious injury. It covers work area safety, electrical safety, personal safety (including wearing appropriate PPE like eye protection, hearing protection, dust mask, protective boots, and gloves), and power tool use and care. Specific warnings include not operating in explosive atmospheres, keeping children and bystanders away, avoiding wet conditions, and ensuring proper maintenance. Battery safety guidelines are also provided, stressing the use of manufacturer-approved batteries and chargers, avoiding disassembly or damage, and proper storage.
Need help?
General
To Next Page