Poulan Pro PP155A42 - Drive Parts List

9
REPAIR PARTS
TRACTOR - MODEL NUMBER PP155A42 (274430), PRODUCT NO. 274430
DRIVE
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
1 – – – – – – Transaxle, Variator SD Pedal
(587884401) (Order parts from
transaxle manufacturer.)
2 532 12 35-83 Key Square
5 874 76 06-36 Bolt Hex HS 3/8-16 unc x 2-1/4
6 532 12 40-28 Bushing Snap
15 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
17 501 48 71-01 Spring, Brake
29 584 82 31-01 Rod, Brake
33 812 00 00-01 Ring E
35 532 19 77-22 Rod, Brake, Park
37 532 18 89-67 Washer .793 x 1.637 x 060
42 532 12 48-72 Cover, Foot Pedal
49 872 11 06-14 Bolt 3/8-16 unc
50 532 19 43-27 Idler Flat
51 873 90 06-00 Nut Lock
52 532 19 43-26 Idler V-Groove
56 532 19 72-53 V-Belt, Drive
64 532 44 83-53 Subasm. Shaft Pedal Brake
67 582 58 01-01 Washer Nylon 13/32 x 13/16 x .109
73 874 49 05-44 Bolt Hex 5/16-18 x 3.75
99 532 43 59-35 Rod Bypass
116 873 90 05-00 Nut Lock Hex Flange 5/16-18
125 817 00 05-12 Screw 5/16-18 x 3/4
143 817 49 05-08 Screw Thdrol 5/16-18 x 1/2 TYTT
159 876 02 04-12 Pin Cotter 1/8 x 3/4
160 532 16 94-84 Retainer Clip
161 532 10 57-09 Spring, Return, Clutch
163 587 84 79-02 Rod Control
166 532 42 91-64 Nut Push .625
167 532 40 52-57 Latch Brake Parking
172 583 97 42-01 Strap Torque Variator
184 532 40 96-30 Handle Park Brk.
185 872 11 06-22 Bolt 3/8-16 unc x 2-3/4
186 532 19 43-21 Spacer Retainer
187 819 13 32-10 Washer 13/32 x 2 x 10 ga
188 582 21 70-01 Link Clutch Ground Drive Long
189 532 19 43-17 Bellcrank Ground Drive
190 532 19 43-18 Keeper. Bellcrank
195 581 50 46-01 Bracket Brake
203 819 11 11-16 Washer 11/32 x 11/16 x 16
205 532 12 17-48 Washer 25/32 x 1-5/8 16 Ga.
210 588 92 10-01 Rocker Asm. Pedal
214 532 42 12-63 Pedal Forward
215 532 44 82-54 Pad Pedal Reverse
211 532 12 01-83 Bearing Nylon
222 879 21 20-10 Washer Flat
277 532 44 85-00 Subasm. Link Rocker Pedal
282 874 49 05-48 Bolt Hex 5/16-18
299 532 41 56-83 Bracket Mount
300 532 41 56-81 Keeper Idler
301 532 41 56-80 Pulley Idler Groove
302 581 42 05-01 Puller Idler Flat
303 872 11 06-18 Bolt
306 876 02 04-16 Pin Cotter
345 872 11 06-06 Bolt RDHD
373 581 46 18-01 Spacer Idler
374 581 47 52-01 Arm Control Brake
375 873 68 06-00 Nut Crownlock 3/8-16 unc
378 584 28 77-01 Nut Push 8 mm