Why is there poor radio reception on my Power Acoustik PTID-5300?
Poor radio reception can occur if the antenna does not have the proper length, so be sure the antenna is fully extended and properly connected. If the antenna is broken, replace it with a new one. Also, check the antenna connection again to ensure it is properly grounded.
What to do if there is no sound from my Power Acoustik PTID-5300?
If there is no sound, first cancel the mute function. If that doesn't work, adjust the volume.
What to do if the function buttons do not work on my Power Acoustik Car Video System?
If the function buttons do not work, press the RESET button.
What to do if the memory contents are lost on my Power Acoustik PTID-5300?
If the memory contents are lost, disconnect the power wire or battery. Alternatively, press the RESET button.
What to do if the disc can not be inserted into my Power Acoustik PTID-5300 Car Video System?
If the disc cannot be inserted, push the disc while pressing the EJECT button. If a disc is already loaded, press the RESET button.
Why does my Power Acoustik PTID-5300 Car Video System disc stop (pause)?
The disc might be dirty or damaged.
Why does my Power Acoustik PTID-5300 Car Video System have audio skipping?
Audio skipping can occur if the disc is dirty or damaged.
Why does the disc come out automatically from my Power Acoustik PTID-5300 Car Video System?
The disc comes out automatically if the temperature is outside the range of the operating temperature.
General| Brand | Power Acoustik |
|---|---|
| Model | PTID-5300 |
| Category | Car Video System |
| Language | English |
To Next Page
