To Next PageTo Next Page
Need help?Do you have a question about the Power Drive Systems DUNLITE UVR100 and is the answer not in the manual?
General| Brand | Power Drive Systems |
|---|---|
| Model | DUNLITE UVR100 |
| Category | Controller |
| Language | English |
Description of the solid-state voltage regulator and its suitability for brushless alternators.
Explanation of how the regulator senses voltage and adjusts field excitation for stable output.
Details the functions of the 14 screw terminals on the regulator for connections.
Instructions for adjusting the regulator for 415V or 208V sensing in three-phase systems.
Guidance for setting up the regulator for 240V or 120V sensing in single-phase systems.
Overview of the three standard controls on the regulator: Voltage Adjust, Stability, and SCOOP.
Procedure for adjusting the SCOOP function's voltage trip point for overload protection.
Details on using S+ and S- terminals for remote indication of SCOOP operation.
Instructions for connecting an external 5K potentiometer for remote voltage adjustment.
Information on the quadrature droop facility for parallel operation of alternators.
Guidance for operating the regulator under adverse conditions like lightning strikes.
Systematic procedure for diagnosing faults when the generating set runs but does not generate.
Procedure to re-establish residual magnetic field for alternator excitation.
Chart detailing specific faults and their diagnostic steps for voltage issues.
Procedure to test the basic functionality of the UVR100 regulator using a globe.
