Handling, transporting and storage
• Protect the Power-edge from impact and intensive sun or heat exposure.
• Protect the Power-edge from damp.
• Do not drop the Power-edge. A hard crash can damage the electronic
components and the case.
• Do not put heavy articles on the Power-edge.
Technical Data
Dimensions: 144mm L x 102mm W x 70mm H
Power supply: 100 – 240 VAC / 50-60Hz
Power supply output: 9VDC / 8000 mA
Revolution speed: Approximately 9500 rpm
Operating temperature: –10°C to 50°C (14°F to 122°F)
Storage temperature: –20°C to 50°C (–4°F to 122°F)
Troubleshooting
Problem Solution
Edge grinding is not very
effective.
The grinding disc pores are blocked.
Clean pores with wire brush or dressing stone.
Ensure adequate sidewall removal before
grinding.
Use a coarser grinding wheel.
The grinding disc strikes
during grinding
Dress the grinding disc at again with a dressing
stone or dressing diamond.
To Next Page
Loading...