WARNING
Edges sharpened with the Power-edge are
extremely sharp. Please take precautions to
avoid hurting yourself and others.
Maintenance operations
User inspection Check the Power-edge before each use. If you suspect
a malfunction of the Power-edge, return the product
to the manufacturer for review and/or repair. Repairs
may only be performed by the manufacturer. Damaged
components which could cause safety defects on the
Power-edge must be replaced only with original parts.
Cleaning the
Grinding disc
With the Power-edge switched on, clean the grinding
disc by briey touching the face of the wheel with a
wire brush (wear protective goggles and mask).
Wheel dressing If the face of the grinding wheel is no longer at or
becomes damaged, you can re-atten the grinding
area using a dressing stone (e.g. old grinding stone)
or dressing stones/diamonds (wear protective goggles
and mask.)
General cleaning Clean the exterior surfaces only with a cloth dampened
with soap and water. Do not soak the unit.
Never use harsh solvent cleaners, abrasives or
polishing agents. Using strong cleaning agents such as
alcohol can result in dulling or cracking of the nish.
Do not use compressed air to clean the unit.
CAUTIONS
• Never use a damaged or faulty Power-edge.
• Use only original grinding discs.
• Never use damaged grinding discs.
• Do not open the Power-edge. There are no user-serviceable
parts inside the unit.
• Never use a different power supply from the one supplied.
To Next Page
Loading...