LSB-1000 Series
jjautomation.com
6
1-4. Precautions
Handling
Caution
1. Avoid excessive vibration or impact to the Switch Box body and any excessive force to the armature,
as these actions may cause damage to the product. Handle carefully while transporting and
operating.
2.
If being used in a plac
e where vibration occurs, using a binding band is recommended to prevent
broken wires because of the vibration.
3. When exposed to possible moisture invasion, please take the necessary measures. For example, if
the Switch Box is left onsite for long periods, a plug should be put in the piping port and a body
cover unit fitted to avoid water penetration.
Take measures to avoid dew condensation inside the positioner if exposed to high temperature and
humidity. Take enough measures against condensation especially when packing for export.
4. Keep magnetic field off the positioner, as this affects its characteristics.
Operating Environment
Caution
1. Do not operate in locations with an atmosphere of corrosive gases, chemicals, sea water, or where
these substances will adhere to the regulator.
2. Do not operate out of the indicated operation temperature range as this may cause damage to
electronic parts and seal materials to deteriorate.
3.
Do not ope
rate in locatio
ns where excessive vibration or impact occurs.
To Next Page
Loading...
Need help?
General