Power-Pole micro anchor Installation Manual

Installing Quick Release Cord (for kayaks)
Lock the quick release clamp into a 90 degree
position as illustrated for quick release pull cord.
Mark and drill pilot hole
with a 1/8” drill bit to
fasten with screw.
Important: The quick release clamp handle must be oriented
as shown and the quick release pull cord pulled towards the
bow of vessel to function properly.
Pull this way to unlock
quick release handle.
R
J
F
S
p

Power-Pole micro anchor Specifications

General

Deployment Depth	8.5 ft
Power Source	12V battery
Control Options	Wireless remote, foot switch, Smartphone app
Mounting	Transom
Deployment Method	Electric
Power Supply	12V DC