Power smart PS12 - Assembly Instruction

11
ASSEMBLY INSTRUCTION
WARNING:
Do not use this product if any parts on the packing list are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have been improperly
assembled could result in serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result
in accidental starting and possible serious personal injury.
Unpacking
Unpack the chipper shredder and all its parts, and compare against the list below. Do not discard the
carton or any packaging until the chipper shredder is completely assembled. Please call 1-800-791-9458
or E-mail us at support@amerisuninc.com if any parts are damaged or missing.
a
Chipper shredder
h
Prodder
b
Trash Can
i
Screw for chassis assembly
c
Wheel
j
Mounting for prodder
d
Axle
k
Screw for non-kicking foot
e
Complete chassis
l
Washer, outside
f
Hex-wrench
m
Wheel fastening screw
g
non-kicking foot
n
Sleeve
Fig.2