User’s Manual
power2max NGeco
deutsch
1 Quick Start Guide
Warning
Please read the user’s manual carefully before installation and use! Improper installation can cause
accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque
values when installing screws and bolts. (See installation instructions at www.power2max.com.)
Before going on a ride, get to know the functions and operation of your power meter. Get a checkup
from a sports physician before starting your training program. Pay attention to traffic and road
conditions before checking any data.
Quick start guide
Thank you for choosing a power2max NGeco power meter!
Scope of delivery
Included:
power meter power2max NGeco
Quick Start Guide including inspection certificate
Optional:
Lockring tool
power meter crankset
bottom bracket
chainring set
chainring bolts
Installation and operation:
1. Remove the red isolation strip by pulling it out of the battery compartment. (You do not
need to open the battery compartment.)
2. The LED indicator is now flashing green. Please connect the power meter to your head unit
(observe manufacturer’s instructions).
3. Install the chainrings to the power meter (observe manufacturer’s instructions and torque
values!).
4. Install the power meter to the crankset (observe manufacturer’s instructions and torque
values!).
5. Install the crankset to the bicycle (observe manufacturer’s instructions and torque values!).
After installing, check the function of the front derailleur and adjust as necessary.
Finished! Now: go ride and have fun with your power2max NGeco!
deutsch
To Next Page
Need help?
Battery
Transmission and Accuracy
