15 Technical specifications
Weight: depending on the version – details on the website
Power source: battery
Battery life: approximately 400 hours of active power measurement
Transmission standards: ANT+ Power Only Profile
Transmitted data:
Power,
Cadence
Accuracy: ±2%
Additional features:
Active thermal correction
Automatic zero-point adjustment
Calibration is independent of chainring selection
No magnet necessary for cadence measurement
Range of measurement and display:
Power: 10 - 2999 W
Torque: 0 - 250 Nm
Cadence: 30 - 250 RPM
Decorative colors: power2max green, white, red, blue, black
LED signals:
Green blinking: power meter activated, ANT+ active for pairing with head unit
Red blinking short: power meter error
Directly after activation:
3 x green: battery charged 60 - 100%
2 x green: battery charged 40 - 60%
1 x green: battery charged 20 - 40%
1 x red short: battery charged 10 - 20% (equates to "weak battery")
1 x red long (5 seconds): battery charged 0 - 10%
16 Copyright
Copyright 2016. All rights reserved. No part of this publication can be reproduced, copied,
photographed, translated, passed on, downloaded or saved on any kinds of storage media.
17 Trademarks
power2max is a registered trademark of the power2max GmbH. All other names of products, brands
or business names used in this manual can be trademarks or registered trademarks of the respective
owners.
18 Changes and errors
Errors excepted. Illustrations in this user’s manual are similar and can deviate from the product. The
information contained in this manual is subject to change without notice. The Saxonar GmbH
reserves the right to make changes and improvements in the product without previous notice.
To Previous Page
Loading...
Need help?
Battery
Transmission and Accuracy