Power2max NGeco User Manual

5 Introduction
Thank you for choosing a power2max NGeco power meter. Your power2max NGeco is a quality
product that has been developed and manufactured with great care by the power2max Team. It
offers you precise and reliable power measurement in all weather conditions while being simple and
intuitive to operate. Please read the user’s manual carefully before using and observe the directions
for correct use of your power2max NGeco power meter.
We wish you plenty of enjoyment and success with your power2max NGeco!
5.1 Warning
Please read the user’s manual before installation and operation! Improper installation can lead to
accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque
values when installing screws and bolts. Screws and bolts that are too tight or loose can damage your
power meter.
Before going on a ride, get to know the functions and operation of your power meter.
Get a checkup from a sports physician before starting your training program.
Pay attention to traffic and road conditions before checking or controlling any data from your head
unit.
6 Scope of delivery
Your power2max NGeco power meter system is made up of:
A specific power2max NGeco power meter (corresponding crank version and bolt circle diameter)
Quickstart Guide with inspection certificate
Packaging
Optional:
Lockring tool to install the power2max NGeco power meter to the crankset
Crankset, bottom bracket, chainring set, chainring bolts as ordered.
IMPORTANT:
Please check that delivery contents are complete and correct.
7 Operation and installation
IMPORTANT:
It is necessary to observe indicated torque values during installation.
You can also find these values in the download area of power2max.com. Screw and bolt connections
that are torqued too heavily or weakly could damage the power meter and impair the function.
In the case of bicycle frames with a BB86 or BB386EVO bottom bracket standard, the compatibility
between the power meter and frame must be tested before installation.

Power2max NGeco Specifications

Battery

battery life	400 hours
battery charge indicator	3 x green: 60 - 100%, 2 x green: 40 - 60%, 1 x green: 20 - 40%, 1 x red short: 10 - 20%, 1 x red long: 0 - 10%

Transmission and Accuracy

transmission standards	ANT+ Power Only Profile
accuracy	±2%
transmitted data	Power, Cadence

Measurement Range

power range	10 - 2999 W
torque range	0 - 250 Nm
cadence range	30 - 250 RPM