Power2max NGeco User Manual

4.4 Limitation of liability
To the degree allowed in accordance with local regulations and with the exception of the expressly
described obligations in this warranty, the Saxonar GmbH and its suppliers exclude any liability for
direct, indirect, special, accidental/coincidental or consequential damages.
4.5 Warranty disclaimer
The warranty does not apply to products that are not installed and/or adjusted professionally or in
accordance with Saxonar GmbH’s appropriate user’s manual. The power2max user’s manuals can be
downloaded on the internet at www.power2max.com.
This warranty does not apply to damages to the product as a result of accidents, crashes or incorrect
use, not observing manufacturer’s specifications or other circumstances in which the product was
subject to loads or forces that the product was not intended for.
This warranty does not apply if the product was modified; this includes but is not limited to any
attempt at opening or repairing any electronic and associated components including motors,
controllers, batteries, wiring, switches and charging units.
Warranty claims are also void if the serial number or manufacturing code has been altered, made
illegible or removed.
Normal wear and tear are excluded from warranty. Normal wear of components can take place as a
result of appropriate use, not adhering to the Saxonar GmbH’s maintenance recommendations and
/or riding in conditions that are not recommended.
The following components are subject to “normal wear”:
Dust seals
Sockets/bushings
Airtight O-rings
Mechanical seals
Moveable rubber parts
Foam rubber rings
Stripped threading/screws (aluminum, titanium, magnesium or steel)
Tools
Batteries
The warranty for the batteries and the power meter does not apply to damages resulting from power
surges, a lack of maintenance or any other inappropriate use.
Damages that are caused by third-party components are excluded from this warranty.
Damages resulting from the use of parts that are not compatible or appropriate or are not authorized
for use by the Saxonar GmbH for power2max power meters are excluded from this warranty.
The warranty shall not cover any damages that are caused by commercial use (rentals).

Power2max NGeco Specifications

Battery

battery life	400 hours
battery charge indicator	3 x green: 60 - 100%, 2 x green: 40 - 60%, 1 x green: 20 - 40%, 1 x red short: 10 - 20%, 1 x red long: 0 - 10%

Transmission and Accuracy

transmission standards	ANT+ Power Only Profile
accuracy	±2%
transmitted data	Power, Cadence

Measurement Range

power range	10 - 2999 W
torque range	0 - 250 Nm
cadence range	30 - 250 RPM