Power2max NGeco User Manual

Lock the lockring tool into a vice. This guarantees that the lockring tool is secure and stable
for further installation: tighten the lockring to the prescribed torque values. You can also find
these values in the download area on power2max.com or ask the crankset manufacturer.
5. Install the entire power meter unit with crankset to your bicycle. To do so, follow the steps in
the installation instructions provided by the crankset manufacturer. If necessary, these can
be requested from the crankset manufacturer or from a retail store. We recommend
checking the correct function of the front derailleur and, if needed, re-adjusting it.
IMPORTANT:
Observe the installation instructions prescribed by the manufacturer.
6. Initial operation and installation of your power2max NGeco power meter is thus completed.
You can go for a ride!

Power2max NGeco Specifications

Battery

battery life	400 hours
battery charge indicator	3 x green: 60 - 100%, 2 x green: 40 - 60%, 1 x green: 20 - 40%, 1 x red short: 10 - 20%, 1 x red long: 0 - 10%

Transmission and Accuracy

transmission standards	ANT+ Power Only Profile
accuracy	±2%
transmitted data	Power, Cadence

Measurement Range

power range	10 - 2999 W
torque range	0 - 250 Nm
cadence range	30 - 250 RPM