17
Cutting
WARNING: Danger of injury! Before starting the trimmer, check
that the cutting head will not come into contact with stones, rubble or
other foreign bodies.
- Switch on the trimmer before you approach the grass that is to be cut.
- Do not cut damp or wet grass.
- Do not overload the trimmer during operation.
- Avoid contacting solid obstacles (stones, walls, fences, etc.) as this
wears the line out quickly. Use the flower guard to keep the trimmer
away from such obstacles.
- Always trail the power cable behind you. Do not pass a running trimmer
over the power cable as it could be damaged.
• Cut the grass by swaying the trimmer sideways to the right and left. Cut
slowly, tipping the appliance forwards by about 30° (Fig. 6).
• Long grass should be cut in layers from top to bottom. Use the flower
guard to maintain the necessary distance whenever required.
Fig. 6
To Next Page
