24
Technical Data
Technical data table
Specification Value
Model GT3010
Rated input voltage 230V~, 50Hz
Power input 450W
Idling speed 10000min
-1
Cutting circle dual line 300mm
Dual line 2 X 5m, fully automatic
Line thickness dual line 1.4mm
Protection class
Protection category IP20
Guaranteed sound power level (L
WA
) 96dB(A)
Measured sound pressure level (LpA)
74.2dB(A), K=3dB
Measured sound power level (L
WA
) 94.2dB(A), K=1.94dB
Vibration (a
h
) at the main handle 3.5m/s
2
K
n
=1.5m/s
2
Vibration (a
h
) at the auxiliary handle 1.5m/s
2
K
n
=1.5m/s
2
/ II
Noise and vibration values have been determined according to the
standards and regulations mentioned in the declaration of conformity.
The vibration and noise measuring processes in accordance with EN
786, appendices D and E, were completed successfully.
Technical and design changes may be undertaken in the course of
further development without notice. All dimensions, references and
information in this instruction manual are therefore not guaranteed.
Legal claims made on the basis of the instruction manual can therefore
not be considered as valid.
The stated vibration emission value was measured in accordance with
a standard testing procedure and may be used to compare one power
tool to another. The stated vibration emission value may also be used
for a preliminary exposure assessment.
To Next Page
Loading...
