10
•
Do not overload your device. Work only within
the indicated range of performance. Do not
use low power machines for heavy-duty
work. Do not use your device for purposes
for which it has not been designed.
•
Only switch the shredder off once the hopper
funnel is completely empty. The shredder may
otherwise clog up and not be able to start
afterwards.
•
Do not attempt to repair the shredder yourself
unless you are qualified to do so.
CAUTION! The following states how to
avoid accidents and injuries due to electric
shock:
•
Only use extension cables that have been
approved for outdoor use and are earthed and
splashproof. The core diameter for extension
cables measuring up to 25m must be at least
1.5mm², and 2.5mm² for cables longer than
25m. Always roll the whole cable off the reel
before use. Check the cable for damage. If
the cable is damaged whilst the shredder is
working, disconnect the mains plug from the
power supply immediately and then check the
extent of the damage. Never use the shredder
if the cable is not in perfect condition.
Electrical safety
To Next Page
Loading...