25
Specification Value
Model SDS2810
Nominal voltage 220-240V~ 50Hz
Nominal power intake 2800W(P40)
Safety class
II/
Degree of protection IP24
Shredding capactiy max. 42mm
Collection box content 60 litres
Weight 22kg
Sound power level measured (L
wa
) 96.3dB(A) KwA=2.4dB(A)
Guaranteed 99dB(A)
Technical Data
Technical data table
The maximum branch thickness that can be shredded is dependent on
the type of wood and the quality of the material being cut.
For hard wood (e.g. oak/beech branches), the maximum branch thickness
that can be shredded is less than for soft wood (e.g. pine/spruce wood).
For dry or knotted wood, the cutting thickness may also be less.
The sound levels have been determined in accordance with noise
measuring process EN 13683:2009-09, appendix F.
The equipment is intended for use only in premises having an eliminate
current capacity equal to or greater than 100A per phase supplied from
a distribution network having a nominal voltage of 220-240V. You may
need to check with your electricity provider if in any doubt.
Noise and vibration values were determined according to the standards
and stipulations mentioned in the declaration of conformity.
To Next Page
Loading...