14
Assembly
UNPACKING
• Unpack all parts and lay them on a flat, stable surface.
• Remove all packing materials and shipping devices if applicable.
• Make sure the delivery contents are complete and free of any
damage. If you find that parts are missing or show damage, do
not use the product but contact the aftersales service within
28 days of purchase. Using an incomplete or damaged product
represents a hazard to people and property.
• Ensure that you have all the accessories and tools needed for
assembly and operation. This also includes suitable personal
protective equipment (PPE).
Preparation
SAFETY FEATURES
Low kickback chainsaw: helps significantly reduce kickback,
or the intensity of kickback, due to specially designed depth
gauges and guard links.
Chain brake lever/hand guard: protects the operator’s left
hand in the event it slips off the front handle while the saw is
running.
WARNING! The CHAIN BRAKE LEVER is a safety feature
designed to reduce the possibility of injury due to kickback by
stopping a moving saw chain in milliseconds.
Stop switch: immediately stops the engine when tripped.
The stop switch must be pushed to the ‘START’ position to
start or restart the engine.
Safety trigger lock: prevents accidental acceleration of the
engine. The throttle trigger cannot be squeezed unless the
safety latch is depressed.
Chain catcher: reduces the danger of injury in the event
the saw chain breaks or derails during operation. The chain
catcher is designed to intercept a whipping chain.
3
2
16
14
17
To Next Page
Loading...
