20
Operation
START THE ENGINE
WARNING! Do not start the engine whilst
holding the chainsaw in one hand. There is a
risk that the chainsaw may touch your body.
This is very dangerous.
1. Set the switch to the ‘I’ position.
2. Engage the chain brake (push it forward until an audible click is
heard.
3. Press and release the primer bulb (B) 10 times.
4. Pull the choke control (A) out to engage.
START
1
2
3
10X
4
START
1
4 6
30s
8 9
2 3
5
7
start
10X
4X
switch
b
B
A
To Next Page
Loading...
