22
9
9. Disengage the chain brake by pulling it back.
10 Push the safety trigger lock (C) firstly and engage the throttle
trigger (D).
NOTE: If you fail to start your machine or require further
assistance, please contact our aftersales support team on
01904 727 509.
- When restarting immediately after stopping the engine or
when the engine is warm, it will not be necessary to use the
choke function.
Make sure the cutting blade is pointing away from your body
at all times, the chain may rotate upon ignition.
CHECKING THE OIL SUPPLY
NOTE: With the chainsaw fully assembled and adjusted,
it is important to check the chain oil supply is dispensing
adequate lubrication.
After starting the engine, run the chain at medium speed and see
if chain oil is being dispensed as shown below.
WARNING! Do not touch the ground with the chain. Ensure
safety clearance of 30cm.
C
D
Chain oil
To Next Page
Loading...
